Hitachi DZ-MV350A Instruction Manual page 152

Hitachi instruction manual dvd video camera/recorder dz-mv350a
Hide thumbs Also See for DZ-MV350A:
Table of Contents

Advertisement

Message
Disc error.
"DISC ERROR"
appears when an
attempt to release write-
protect is made.
Disc full. Cannot
execute.
Disc has no data.
Disc has no Play List.
Disc includes protected
scenes. Delete scenes?
Disc is full. Cannot add
control info.
Disc is not formatted.
Format the disc now?
DPOF is not set to a
scene.
DPOF scenes over limit.
Cannot set DPOF
scenes.
Drive overheat. Please
retry later.
DVD-R Disc, Video
mode cannot be
changed.
END OF DISC
End scene cannot be
divided.
152
Cause & Troubleshooting
Use another disc.
See *3 on page 155.
Mismatch in recording information may be caused by editing
done on some device other than this DVD video camera/recorder.
Initialize the disc or use another disc.
Initializing the disc will erase all data on it.
If you have write-protected a disc using the write-protect setting tool
(WPTOOL) that is equipped with the UDF driver contained on the
CD-ROM provided with this DVD video camera/recorder, you
cannot release the write-protect on this DVD video camera/
recorder as is. Use the write-protect setting tool on PC to release the
write-protect.
Delete unnecessary scenes before using this disc, or use another
disc.
This message will appear when the
disc inserted on which no still is recorded (It will appear if you
attempt playback or editing on Disc Navigation, but will not appear
if you press
on camera through image.).
Switching of play list was selected with no play list stored.
The disc may be software protected from a device other than this
DVD video camera/recorder. To release this case, use a device that
has executed software-protect.
The number of entered scenes has reached the limit that can be
entered, so the control information for generating thumbnails
cannot be added.
Combine several scenes or delete them.
Has the disc been initialized on a PC?
Choose "YES" and initialize the disc when using it on this DVD
video camera/recorder. Initialization will delete all data on the disc.
See *2 on page 155
This message will appear when "Slide Show: DPOF" is specified for
the card to which DPOF was not set.
The maximum number of scenes for which DPOF can be set is 999.
The temperature inside the DVD video camera/recorder is too high,
and reading or writing of the data on disc may not be performed
normally.
Turn the DVD video camera/recorder off and wait for a while. The
temperature will be effectively decreased if the DVD video camera/
recorder is placed in a well-ventilated spot.
With DVD-R disc, the movie quality mode once used for recording
cannot be changed.
The disc is full.
You cannot record on this disc anymore. Prepare another disc or
delete unnecessary movie scenes from this disc.
Division is not possible at the end of scene.
button is pressed with a
Reference
page
22, 76
127
101
118
101, 107
127
131
111
45
26
26
108

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dz-mv380a - camcorder

Table of Contents