Macro Recording; Using Conversion Lens (Generally Available) - Hitachi DZ-MV350A Instruction Manual

MACRO RECORDING

Use the macro function when recording a small object from close-up position: You can shoot the subject
as close as approximately 3/8" (2 cm) from the lens surface, magnifying the image to fill the screen.
1
Aim the DVD video camera/recorder at the
subject, and press down the zoom lever to "W"
control side.

USING CONVERSION LENS (GENERALLY AVAILABLE)

Use generally available tele-conversion lens or wide-conversion lens with filter diameter of 30.5 mm.
Remove the lens hood on the top surface of lens, and then attach the conversion lens over the lens.
Lens hood
:
Note
The four corners of screen may be dim depending on the
conversion lens used.
56
(Remove)
:
Note
•
Zoom can be used, but the subject may not be focused,
depending on the distance to the subject. In this case,
move the zoom to "W" control side to focus.
•
The amount of light tends to be insufficient during macro
recording: If the subject image is too dark, use additional
lighting.
Conversion lens
(Attach)