Playing Back; Immediately Checking Recorded Scene - Hitachi DZ-MV350A Instruction Manual

Playing Back

IMMEDIATELY CHECKING RECORDED SCENE

You can check your recording immediately on the spot.
1
Press button in the recording pause status.
The DVD video camera/recorder will enter the
playback mode, and the scene you have
recorded last will be played back.
When playback is finished, the DVD video
camera/recorder will enter the pause status at
the last image on disc.
If the playback pause status continues for as long
as 5 minutes, the DVD video camera/recorder
will automatically return to the recording pause
status.
2
Press the button.
Playback will stop, and recording pause status
will be restored.
Tilt up/down and to left/
right to select, and then
press to designate.
:
Note
•
If the LCD monitor is open during playback of movie,
playback sound will be heard from the speaker. Adjust the
sound volume using the volume control buttons (
•
To temporarily stop playback, press the
Press the button again to restart playback.
•
Even if you stop playback midway and immediately start
recording again, the new image will be recorded after the
last scene on disc or card (the previous images will not be
overwritten).
•
When playing back a still with a large number of pixels on
card, "Playback." will appear, and it will take some time for
the still to appear.
•
Depending on the amount of data to be played back, it
may take some time for the playback image to appear.
•
Do not operate the power switch or remove the card while
the ACCCSS/PC or CARD ACCESS indicator is lit or
blinking: Doing so may damage the card or the data on
card.
 
, ).
button.
67