Connecting Wirelessly Using Wps - D-Link DCS-2130 User Manual

Installation

Connecting Wirelessly Using WPS

Alternatively, you may create a wireless connection by using the WPS Button on the
back of the camera.
To create a WPS connection:
Step 1
Press and hold the WPS button on the back of the camera for three seconds. The WPS
status LED above the button will blink.
Step 2
Press the WPS button on your router within 60 seconds. The WPS button is usually
on the front or side of your router. On some routers, you may need to log in to the web
interface and then click on an onscreen button to activate the WPS feature. If you are not
sure where the WPS button is on your router, please refer to your router's User Manual.
The DCS-2130 will automatically create a wireless connection to your router. While
connecting, the green LED will flash and your camera will reboot.
D-Link DCS-2130 User Manual 9