Image Setup - D-Link DCS-2130 User Manual

Configuration
In this section, you may configure the video image settings for your camera. A preview of the image will be shown in Live Video.
Enable Privacy Mask:
Anti Flicker:
Mirror:
Power Line:
White Balance:
D-Link DCS-2130 User Manual

Image Setup

The Privacy Mask setting allows you to specify up
to 3 rectangular areas on the camera's image to be
blocked/excluded from recordings and snapshots.
You may click and drag the mouse cursor over the
camera image to draw a mask area.
Right clicking on the camera image brings up the
following menu options:
Disable All: Disables all mask areas
Enable All: Enables all mask areas
Reset All: Clears all mask areas.
If the video flickers, try enabling this setting.
This will mirror the image horizontally.
Flip: This will flip the image vertically. When turning Flip
on, you may want to consider turning Mirror on as
well.
Select the frequency used by your power lines to
avoid interference or distortion.
Use the dropdown box to change white balance
settings to help balance colors for different
environments. You can choose from Auto, Outdoor,
Indoor, Fluorescent, and Push Hold.
24