Installation; Connecting The Camera - D-Link DCS-4802E User Manual

Section 2: Installation

Installation

Connecting the Camera

You can power the DCS-4802E two different ways: through PoE or through a power adapter.
Powering the camera through PoE (Class 2):
Connect an Ethernet cable to the LAN(PoE) port on the camera. Connect the
other end of the cable to your PoE switch or PoE injector.
Powering the camera through a power adapter (not included):
Connect a 12 V, 1.5 A power adapter to the power connector.
Connect an Ethernet cable to the LAN(PoE) port on the camera. Connect the
other end of the cable to your network.
D-Link DCS-4802E User Manual 8