D-Link DCS-2130 User Manual page 19

Configuration
Enable UPnP:
Enabling this setting allows your camera to be
configured as a UPnP device on your network.
Enable UPnP Port Forwarding:
Enabling this setting allows the camera to add port
forwarding entries into the router automatically on a
UPnP capable network.
Enable PPPoE:
Enable this setting if your network uses PPPoE.
User Name / Password:
Enter the username and password for your PPPoE
account. Re-enter your password in the Confirm
Password field. You may obtain this information
from your ISP.
HTTP Port:
The default port number is 80.
Access Name for Stream 1~3:
The default name is video#.mjpg, where # is the
number of the stream.
HTTPS Port:
You may use a PC with a secure browser to
connect to the HTTPS port of the camera. The
default port number is 443.
RTSP Port:
The port number that you use for RTSP streaming
to mobile devices, such as mobile phones or PDAs.
The default port number is 554. You may specify the
address of a particular stream. For instance, live1.
sdp can be accessed at rtsp://x.x.x.x/video1.sdp
where the x.x.x.x represents the ip address of your
camera.
D-Link DCS-2130 User Manual 19