Wps Setup - D-Link DCS-935LH Quick Installation Manual

WPS SETUP

Alternatively, you may create a WPS connection if your router or access point supports WPS. To
create a WPS connection:
Step 1:
Press and hold the WPS button on the back of the camera for three seconds. The Power LED will
blink green.
Step 2:
Press the WPS button on your wireless router or access point within 60 seconds. On some routers,
you may need to log into the web interface and then click an onscreen button to activate the WPS
feature. If you are not sure where the WPS button is on your router or access point, please refer to
your router's user manual.
The DCS-935LH will automatically create a wireless connection to your router. The Power LED will
flash while the camera is connecting, and will turn solid green when the camera is connected.
4
DCS-935LH