Configuration
Configuration
Using the Configuration Menu
After completing the Camera Setup Wizard, you are ready to use your camera. The camera's built-in Web configuration utility is
designed to allow you to easily access and configure your DCS-2130. At the end of the wizard, click the Go To Camera button, or enter
the IP address of your camera into a web browser, such as Internet Explorer. To log in, use the user name admin and the password
you created in the Installation Wizard. If you did not create a password, the default password is blank. After entering your password,
click the OK button.
Note: If you are directly connecting your PC to the camera, or if you are using the camera on a closed network, the default IP is
192.168.0.20.
D-Link DCS-2130 User Manual
10