Wps Setup - D-Link DCS-5009L Quick Installation Manual

PrODUCT SETUP
maC USer
Insert the Installation CD-ROM into your computer's CD drive. On the desktop, open your CD drive
and double-click on the SetupWizard file.
Within 20-30 seconds, the Setup Wizard will open, which will guide you step-by-step through the
installation process from connecting your hardware to configuring your camera and registering it with
your mydlink account.
Note: mydlink portal requires Java
For more guidelines, please refer to mydlink FAQ pages at https://eu.mydlink.com/faq/mydlink

wPS SETUP

Alternatively, you may create a WPS connection if your router or access point supports WPS. To create
a WPS connection:
Step 1:
Press and hold the WPS button on the camera for three seconds. The blue WPS status LED above the
button will blink.
Step 2:
Press the WPS button on your wireless router or access point within 60 seconds. On some routers, you
may need to log into the web interface and then click an onscreen button to activate the WPS feature.
If you are not sure where the WPS button is on your router or access point, please refer to your router's
user manual.
The DCS-5009L will automatically create a wireless connection to your router. While connecting, the
green LED will flash and your camera will reboot.
4
SetupWizard
TM
to function correctly.
DCS-5009l