Zooming; Macro Recording - Hitachi DZ-BX35A Instruction Manual

Hitachi dz-gx3300a/dz-gx3200a dz-gx3100a/dz-bx35a instruction manual
Hide thumbs Also See for DZ-BX35A:
Table of Contents

Advertisement

Zooming

If you continue to hold the zoom lever on the
"T" control side with Dig. Zoom specified, the
digital zoom will be activated midway (when
optical 10-power is exceeded on DZ-GX3300A/
GX3200A, or optical 15-power is exceeded on
DZ-GX3100A or optical 25-power is exceeded on
DZ-BX35A).
You can zoom up to 500-power on DZ-
GX3300A/GX3200A; up to 800-power on DZ-
GX3100A; up to 1,200-power on DZ-BX35A.
W: recording wide area
(wide-angle)

MACRO RECORDING

Use the macro function when recording a small object from close-up position: You can shoot the
subject as close as approximately 13/16" (2 cm) from the lens surface, magnifying the image to fill
the screen.
1
Aim the DVD video camera/recorder at the
subject, and press the zoom lever to "W"
control side.
T: recording enlarged
image (telephoto)
1<>2/3
1
Press the MENU button, choose "Dig. Zoom"
on the "Camera Functions Setup" menu
screen, and then press the A button.
2
Choose the desired magnification, and then
press the A button.
3
Press the MENU button to end the setting.
Moving the zoom lever will display the
digital zoom bar.
:
Note
• The digital zoom setting will be stored in memory
even if the DVD video camera/recorder is turned off.
• You can also use the DIGITAL ZOOM button on
remote control to switch the digital zoom setting:
Pressing the button during movie recording will switch
the setting between "Off", "40×"*
Pressing the button during photo recording will switch
between "Off" and "40×"*
• If you set zoom to "500×"*
digital zoom will be up to 40×*
• When a subject is zoomed, it may be momentarily out
of focus.
• When digital zoom is engaged, the image quality will
be rougher.
*1 "60x" on DZ-GX3100A; "100x" on DZ-BX35A.
*2 "800x" on DZ-GX3100A; "1,200x" on DZ-BX35A.
:
Note
• Zoom can be used, but the subject may not be
focused, depending on the distance to the subject. In
this case, move the zoom to "W" control side to focus.
• The amount of light tends to be insufficient during
macro recording: If the subject image is too dark, use
additional lighting.
1
2
, and "500×"*
:
1
.
2
when recording photo, the
1
.
51

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents