Initial Settings; Switching Operating Sound On Or Off (Beep); Turning Dvd Video Camera/Recorder Off Automatically (Power Save); Changing Display Language (Language) - Hitachi DZ-BX35A Instruction Manual

Initial Settings

Press the MENU button, and then use f/e/d/c/A to display the "Initial Setup" menu
screen. See page 49 for detailed operation procedure. Press the MENU button again to exit setting.

SWITCHING OPERATING SOUND ON OR OFF (BEEP)

Select "On" or "Off", and
then press the A button.
On: Beep will be heard
when the power
switch is changed
over, the REC button is pressed in the Video
mode, the SLEEP/START or EJECT button
is pressed, etc.
Off: No beep is heard.
TURNING DVD VIDEO CAMERA/RECORDER OFF AUTOMATICALLY
(POWER SAVE)
Select "On" or "Off", and
then press the A button.
On: To engage power
save. If the DVD
video camera/
recorder is left in the recording pause status
without being operated for 5 minutes, it
will automatically turn off to prevent the
battery from discharging needlessly.
Off: To cancel power save.

CHANGING DISPLAY LANGUAGE (LANGUAGE)

You can change the language used to display the menu and information.
The following shows that English is changed to French.
1
Press A or c with
the screen shown on the
right displayed: The
"Language" screen will
appear.
2
Choose "Français", and
then press A.
The display will change
to French.
34
1<>2/3
Note
I n i t i a l S e t u p
The "Beep" setting will be stored in memory even when
Be e p On
O f f
P o w e r S a v e
the DVD video camera/recorder is turned off.
R e c o r d L E D
L a n g u a g e
Demo Mode
Re s e t
ENTER RETURN
Note
I n i t i a l S e t u p
• To turn the DVD video camera/recorder on again from
Be e p On
P o w e r S a v e O f f
R e c o r d L E D
L a n g u a g e
Demo Mode
Re s e t
ENTER RETURN
• The Power Save setting will not appear in the on-
• If the sleep/start standby status continues for 30
Note
I n i t i a l S e t u p
The language setting will be stored in memory even
Be e p On
P o w e r S a v e O f f
when the DVD video camera/recorder is turned off.
R e c o r d L E D On
L a n g u a g e En g l i s h
Demo Mode Au t o
Re s e t
ENTER RETURN
L a n g u a g e
En g l i s h
F r a n ç a i s
E s p a ñ o l D e u t s c h
I t a l i a n o
ENTER RETURN
:
:
automatic off activated by the power save function,
set the power switch to "OFF", and then set it to "O",
"N" or "P".
screen information display.
minutes, the DVD video camera/recorder will
automatically turn off regardless of the Power Save
setting.
: