Turning Dvd Video Camera/Recorder On And Off - Hitachi DZ-BX35A Instruction Manual

Hitachi dz-gx3300a/dz-gx3200a dz-gx3100a/dz-bx35a instruction manual
Hide thumbs Also See for DZ-BX35A:
Table of Contents

Advertisement

Turning DVD Video Camera/Recorder On and
Off
While holding down the gray button at the right
of power switch, set the switch according to
each recording function:
Set to "OFF":
The DVD video camera/
recorder will turn off
Set to "P":
To record still on SD
memory card
Set to "O":
To record movie on DVD-
RAM/DVD-RW/DVD-R/
+RW disc
Set to "N":
To record still on DVD-
RAM disc
Power ON status
During playback, set the power switch to "O"
or "N" when using disc, or set it to "P" when
using card.
Turn the switch while holding down the gray
button at the right of switch.
Power switch
:
Note
• Once you turn the DVD video camera/recorder on to
let it recognize the disc, you can immediately record
or play back by turning the DVD video camera/
recorder on again. However, if a long time has
elapsed after the disc was inserted, it will take some
time for the DVD video camera/recorder to start
because it must recognize the disc again (see
"Troubleshooting" on page 139).
• It will take some time for the DVD video camera/
recorder to display the Disc Navigation screen after
power is turned on.
• When the DVD video camera/recorder is turned on,
the self-diagnosis function will work and a message
may appear. In this case, refer to "Trouble Messages"
on page 133 and take corrective action.
31

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents