Hitachi DZ-BX35A Instruction Manual page 138

Message
Scenes over limit.
Cannot add scenes.
Scenes over limit.
Cannot divide scene.
Stop processing
There was no scene
which can be deleted.
The disc is finalized.
Finalize is not required.
This disc cannot be
used. Please replace
disc.
This disc is recorded by
the PAL system. Please
replace disc.
UNFORMAT DISC
Use AC adapter/
charger.
Use AC adapter/
charger.
Turn off power.
Write protected.
Check card.
Write protected.
Check disc.
*1
• This message may also appear when dirt adheres to disc. If this message appears when a recorded
disc is recognized immediately after it is inserted, do not repair the disc; remove it and then use
the provided disc cleaning cloth to clean off the dirt before using it.
• This message may also appear when condensation occurs. In this case, do not repair the disc; turn
the DVD video camera/recorder off, wait until it dries out, and then turn it on again.
138
Cause & Troubleshooting
The number of scenes entered in play list has reached the limit
that can be entered.
Delete several scenes.
The number of entered scenes has reached the limit that can be
entered.
Delete several scenes.
The C button was pressed to stop processing of multiple scenes.
This message will appear if you try to delete multiple scenes on
Disc Navigation when all the selected scenes have been locked.
Release the lock on scenes before executing deletion.
This message will appear if you press the FINALIZE button with a
finalized DVD-RW/DVD-R/+RW loaded in this DVD video camera/
recorder. Finalizing the disc is not necessary.
A disc that cannot be used on this DVD video camera/recorder
has been loaded. Check the type of disc.
This DVD video camera/recorder can use only discs recorded on
the NTSC system. A disc recorded on the PAL system cannot be
used on this DVD video camera/recorder.
The disc is not initialized or it is damaged.
If this message appears, be sure to initialize the disc on this DVD
video camera/recorder before using it.
Reinitializing even a disc used on this DVD video camera/
recorder may be necessary (initializing will erase all recorded
contents on disc). If this message appears, try to initialize the
disc. If the same message still appears, the disc may be
damaged: Use another disc.
See *2 on page 139.
Finalization is not possible when the DVD video camera/recorder
is powered by a battery: Use the AC adapter/charger for
finalization.
Scene cannot be repaired when the DVD video camera/recorder
is powered by a battery.
If the AC adapter/charger is unavailable in handy place, remove
the disc, use the opposite side, or use another disc. To repair the
removed disc, insert the disc into the DVD video camera/recorder
afterwards, and connect the AC adapter/charger.
A card with the erase prevention switch locked is inserted: Unlock
the switch.
• A write-protected disc is inserted.
• Release the write-protect using the Disc Navigation menu.
Reference
page
92, 96
92, 96
—
79, 86
102
25
—
99
10
26, 102
26
25
100