Copying Stills On Dvd-Ram Disc To Card (Copy) - Hitachi DZ-BX35A Instruction Manual

COPYING STILLS ON DVD-RAM DISC TO CARD (COPY)

1
Set the power switch to "O" or "N".
2
Press the DISC NAVIGATION button.
3
Select the still to be copied.
4
Press the MENU button.
5
Choose "Copy" on the "Scene" menu screen,
and then press the A button.
6
The "Copy to card" screen will appear: If you
are sure you want to copy the selected still,
press the A button.
If you want to change the still to be copied,
you can change it on this screen.
7
The screen for verifying copy will appear:
Choose "YES", and then press the A
button.
Choose "NO" to cancel copy.
After Yes or No setting, the "Copy to card"
screen will be restored.
Repeat steps 6 and 7 to copy other stills to
card.
8
Press the C button to quit.
:
Note
• No movie can be copied.
• If you press the MENU button before pressing the
A button in step 6, the submenu screen will appear
(p. 80).
• See "Category" (p. 104) to check the stills recorded
on DVD-RAM disc.
• You can also select multiple scenes (p. 75).
• Even if all scenes, including movies, are selected to
be copied, only stills will be copied.
• Data on card cannot be copied to disc.
• The quality of still copied from disc to card will be the
same as when you recorded still on disc.
• Stills recorded on a device other than this DVD video
camera/recorder may not be copied normally.
13
85