Type Set Of Service Class 2 Or 3 - Panasonic Easa-Phone VA-208 Installation Manual

Step 4
4a.
4b. To set for NO RESTRICTION FOR DIALING STORED COMMON NUMBERS,
depress the COL 1 button, if extinguished, to light the LED lamp.
Step 5 Depress the # button on the Dial Pad to store the program established in Step 4.
Step 6 Proceed to next feature program or depress FLASH button and SPKR button in sequence to end program:
?g
mode.
OUTWARD DIALING RESTRICTION SETTINGS
RESTRICTED FROM DIALING STORED COMMON NUMBEF,
Activate only one (1) of the following options:
To set the RESTRICTION FOR DIALING STORED COMMON NUMBERS, depress
the COL 1 button, if on, to extinguish the LED lamp.
OR
/ Option i C- 1
No Restriction C
I -._
TYPE SET OF SERVICE CLASS 2 OR 3
TEL stations which are programmed for Service Class 2 or 3 must also be programmed for Type A or Type B Service
The type service is dependent upon the long distance dialing plan of your local area. Geographic areas where you dia
the area code and number should be assigned the Type A Service. Geographic areas where you must dial " 1" before
dialing the area code and number should be assigned the Type B Service.
0 To program the Type Set of Service Class 2 or 3, perform the f&lowing steps:
Step 1
Step 2
Step 3
Step 4
4a.
4b.
Step 5
Step 6
Place the system in the programming mode. See instructions in the General Operational Procedures.
Place TEL Station 1 in the programming mode by depressing the SPKR button.
Dial the Feature Program Actvation Code m 191 r]
Activate only one (1) of the following options:
To set for Type A Service, depress the COL 2 button, if on, to extinguish the LED
j
Option
1
COL
2
~
/
lamp.
Type A
1
OFF
/
OR
To set for Type B Service, depress the COL 2 button, if extinguished, to light the
LED lamp.
Depress the # button on the Dial Pad to store the program established in Step 4.
i Option
/ coL 2 1
Type 6 1 ON ,
Proceed to next feature program or depress FLASH button and SPKR button in sequence to end programming
mode.
45