Set The Speakerphone - Panasonic Easa-Phone VA-208 Installation Manual

Is-__ --_ --._-__- ----__.--
KEY TELEPHONE SETTINGS
SET *THE SPEAKERPHONE
This feature is to indicate whether a TEL Station is connected as a Key Telephone or as a Key Telephone with a Speakerphone.
Each TEL Station must be individually programmed for SET THE SPEAKERPHONE.
NOTE: Only one TEL Station can be programmed at at a time. To change the SET THE SPEAKERPHONE on multiple
TEL Stations, complete Steps 1 thru 5 for the first TEL Station and then repeat Steps 3 thru 5 for each remaining
TEL Station you wish to change.
l The initial program setting is for all TEL Stations to be connected as a Key Telephone.
0 To change the program setting, perform the following steps:
Step 1
Step 2
Step 3
Step 4
4a.
Place the system in the programming mode. See instructions in the General Operational Procedures.
Place TEL Station 1 in the programming mode by depressing the SPKR button.
Dial the Feature Program Activation Code for the particular TEL Station to be programmed.
For TEL Station l-Dial Feature Program Activation Code F] r] ' WI
For TEL Station e--Dial Feature Program Activation Code
q
E] Fi
For TEL Station 3' Dial Feature Program Activation Code m pj a
For TEL Station 4-Dial Feature Program Activation Code m p] F]
For TEL Station 5-Dial Feature Program Activation Code w [yi 171
For TEL Station 6-Dial Feature Program Activation Code Fi pi p\
For TEL Station 7-Dial Feature Program Activation Code F] p] [g
For TEL Station 8-Dial Feature Program Activation Code pj p\ p]
Activate only one (1) of the following options:
To set the TEL Station for connection as a Key Telephone, depress the REDIAL
button, if on, to extinguish the INT LED lamp.
OR
4b. To set the TEL Station for connection with a Speakerphone, depress the REDIAL
button, if extinguished, to light the associated INT LED lamp.
Step 5 Depress the # button on the Dial Pad to store the program established in Step 4.
Step 6 Proceed to next feature program or depress FLASH button and SPKR button in sequence to end programming
mode.
I
Option
1
REDIAL
Key
1
OFF
Option
1
REDIAL
SPKR 1 ON
42