Col Interruption - Panasonic Easa-Phone VA-208 Installation Manual

Step 4
4a.
4b.
Step 5
Step 6
KEY .TELEPHONE SETTINGS
COC AUTO ANSWERING
Activate only one (1) of the following options:
To set the TEL Station for COL AUTO ANSWERING, depress the COL 1 button,
if extinguished,
to light the LED lamp.
OR
To set the TEL Station for no COL AUTO ANSWERING, depress the COL 1 button,
if on,
to extinguish the LED lamp.
-1
Depress the # button on the Dial Pad to store the program established in Step 4.
Proceed to next feature program or to end programming, depress FLASH button and SPKR button in sequence.
COL INTERRUPTION
This feature allows a telephone user to maintain privacy or be interrupted during a conversation by a third party on another
TEL Station. Each TEL Station must be individually programmed for COL INTERRUPTION.
NOTE: Only one TEL Station can be programmed at a time. To change the COL INTERRUPTION on multiple TEL Stations,
complete Steps 1 thru 5 for the first TEL Station and then repeat Steps 3 thru 5 for each remaining TEL Station
you wish to change.
l
The initial program setting is for all TEL Stations to have COL INTERRUPTION.
0 To change the program setting, perform the following steps:
Step 1 Place the system in the programming mode. See instructions in the General Operational Procedures.
Step
2 Place TEL Station 1 in the programming mode by depressing the SPKR button.
Step
3
Dial the Feature Program Activation Code for the particular TEL Station to be programmed.
For TEL Station l-Dial Feature Program Activation Code F] m
q
For TEL Station 2-Dial Feature Program Activation Code Fj m p]
For TEL Station 3-Dial Feature Program Activation Code p] p] p\
For TEL Station 4-Dial Feature Program Activation Code m p] p]
For TEL Station 5-Dial Feature Program Activation Code F\ p] b\
For TEL Station 6-Dial Feature Program Activation Code p\ b] p\
For TEL Station 7-Dial Feature Program Activation Code
q
p\ p]
For TEL Station a--Dial Feature Program Activation Code m m m
40