Date/Time Menu; Security Menu - ThinkPad X140e User Manual

Table 4. Config menu items (continued)
Menu item
Beep and Alarm
Serial ATA (SATA)

Date/Time menu

If you need to set the current date and time of your computer, select Date/Time from the ThinkPad Setup
program main menu. The following submenu is displayed:
• System Date
• System Time
To change the date and time, do the following:
1. Using the up and down arrow keys, select the item to change the date or time.
2. Press Tab, Shift+Tab, or Enter to select a field.
3. Type the date or time.
Notes: Another way to adjust the date and time is pressing the following keys:
• F5 or –: Change to a lower value.
• F6 or the combination of Shift and +: Change to a higher value.
4. Press F10 to save the changes and restart the system.

Security menu

If you need to set the security features of your computer, select Security from the ThinkPad Setup program
main menu.
Notes:
• The default settings are already optimized for you. If you consider changing the computer configuration,
proceed with extreme caution. Setting the configuration incorrectly might cause unexpected results.
• On each submenu, you can enable a function by selecting Enabled, or disable it by selecting Disabled.
The following submenu is displayed:
• Password: Set a password.
• UEFI BIOS Update Option: Specify the settings for Flash UEFI BIOS update.
• Memory Protection: Specify the settings for the Data Execution Prevention feature.
• Virtualization: Enable or disable the settings for AMD-V™ Technology (for models with an AMD CPU).
Submenu item
Password Beep
Keyboard Beep
SATA Controller Mode
Option
Selection
• Disabled
• Enabled
• Disabled
• Enabled
• Compatibility
• AHCI
Chapter 7
Comments
Enables or disables the
password beep when the
system is prompting for
the power-on, hard disk, or
supervisor password to be
typed.
Enables or disables the
keyboard beep when
unmanageable key
combinations are pressed.
Selects SATA controller
operation mode. If you
select Compatibility , the
SATA controller operates in
compatibility mode.
.
Advanced configuration
83