Adjusting The Oven Temperature Control - Whirlpool RBS277PD Use And Care Manual

USI N G Y OU R OV E N

Adjusting the oven temperature control

Although your new oven is properly adjusted
to provide accurate temperatures, it may
cook faster or slower than your old oven.
If, after using the oven for a period of time,
you are not satisfied with the baking/roasting
results, you can change the offset tempera-
ture by following these steps:
NOTE: These examples are for double
upper ovens only. Other ovens may look
slightly different.
1. Press and hold Bake pad for
5 seconds.
The display will show the current offset
temperature, for example "0", if you have
not previously adjusted the temperature.
2. Set new offset temperature.
Press to raise the temperature or
lower the temperature in 10°F amounts.
You can set the temperature change to
as low as -30°F or as high as +30°F. A
minus (-) sign will appear before the
number when decreasing the tempera-
ture setting to show the oven will be
cooler by the displayed amount. There is
no sign in front of the number when
increasing the temperature setting.
18
NOTE: DO NOT measure oven temperature
with a thermometer. Opening the oven door
will lower the oven temperature and give you
an inaccurate reading. Also, the thermom-
eter temperature reading will change as your
oven cycles.
PRESS
UPPER
OVEN
to select
oven (for
double
ovens)
PRESS
BAKE
PRESS
to
TEMP
YOU SEE
F
BAKE
(factory setting of "0")
YOU SEE
F
BAKE
(example when making oven
10°F [or 5°C] hotter)