Fahrenheit And Celsius; Timer; Control Lock; Oven Temperature Control - Whirlpool GSC308 Use & Care Manual

All Tones
All of the above tones are preset on, but can be turned off.
To Turn Off/On: Touch and hold STOP TIME for 5 seconds. A
tone will sound, and "Snd oFF" will appear on the lower oven
display for 3 seconds. Repeat to change back to "Snd on."
Tone Volume
The volume is preset at high, but can be changed to low.
To Change: Touch and hold the number pad "7" for 5 seconds. A
tone will sound, and "Snd Lo" will appear on the lower oven
display for 3 seconds. Repeat to change back to "Snd HI."
REMINDER TONES
The Timer and Timed Cooking reminder tones are preset on, but
can be turned off. Reminder tones do not include end-of-cycle
tones. If "All Tones" have been turned off, the reminder tones
cannot be independently turned on.

Timer

To Turn Tones Off/On: Touch and hold TIMER SET until a tone
sounds. Repeat to turn back on.
Timed Cooking
To Turn Tones Off/On: Touch and hold COOK TIME until a tone
sounds, and the lower oven display returns to inactive mode
(blank). Repeat to turn back on.

Fahrenheit and Celsius

The temperature is preset at Fahrenheit, but can be changed to
Celsius.
To Change: Touch and hold CUSTOM BROIL for 5 seconds. A
tone will sound, and "C" will appear on the display. Repeat to
change back to Fahrenheit.
The Timer can be set in hours and minutes and counts down the
set time. The Timer does not start or stop the oven.
To Set:
1. Press TIMER SET.
If no action is taken after 4 minutes, the electronic oven
display will return to the time of day mode.
2. Press the number pads to set the length of time.
3. Press TIMER SET or START.
If not pressed within 1 minute, the display will return to the
time of day mode and the programmed function will be
canceled.
When the set time ends, if enabled, end-of-cycle tones will
sound, then reminder tones will sound every minute.
4. Press TIMER OFF anytime to cancel the Timer and/or stop
reminder tones.
Remember, do not press the Off/Cancel pads because the
respective oven will turn off.
The time can be reset during the countdown by repeating the
above steps.
6
Timer

Control Lock

The Control Lock shuts down the control panel pads to prevent
unintended use of the ovens.
When the control is locked, only the Clock, Timer Set and Timer
Off pads will function.
The Control Lock is preset unlocked, but can be locked.
To Lock/Unlock Control: Before locking, make sure the ovens,
Timer and Timed Cooking are off. Press and hold START until a
single tone sounds. "CONTROL LOCK" and a picture of a lock
will appear on the oven display within 5 seconds. Repeat to
unlock and remove "CONTROL LOCK" from the oven display.

Oven Temperature Control

IMPORTANT: Do not use a thermometer to measure oven
temperature because opening the oven door and element or
burner cycling may give incorrect readings.
The oven provides accurate temperatures; however, it may cook
faster or slower than your previous oven, so the temperature
calibration can be adjusted. It can be changed in Fahrenheit or
Celsius.
A minus sign means the oven will be cooler by the displayed
amount. The absence of a minus sign means the oven will be
warmer by the displayed amount. Use the following chart as a
guide.
ADJUSTMENT °F
(ADJUSTMENT °C)
10°F (5°C)
20°F (10°C)
30°F (15°C)
-10°F (-5°C)
-20°F (-10°C)
-30°F (-15°C)
To Adjust Oven Temperature Calibration:
1. Press and hold BAKE until the oven display shows the current
calibration, for example, "0° CAL."
2. On double oven models only, press UPPER OVEN or LOWER
OVEN.
3. Press the number pads to increase or to decrease the
temperature in 10 F (5 C) amounts. The adjustment can be
set between 30°F (15 C) and -30°F (-15 C).
4. Press START.
COOKS FOOD
...a little more
...moderately more
...much more
...a little less
...moderately less
...much less