Removing The Oven Door - Whirlpool RBS277PD Use And Care Manual

Electric built-in convection ovens
Hide thumbs Also See for RBS277PD:
Table of Contents

Advertisement

PART
Oven door glass
Oven cavity

Removing the oven door

For normal use of your oven, you do not
need to remove the door. However, you can
remove the door by following the instructions
in this section.
The oven door is heavy. Use both hands
to remove and replace the door. Do not lift
and carry the door by the handle. To remove
and replace the door you may need help.
To remove:
1.
Open door all the way.
5
NOTE:
Two
" Allen wrenches or two nails
32
of similar diameter may be used if factory
furnished door removal pins have been
misplaced. Be careful not to damage
porcelain finish.
2.
Insert small end of a door removal pin
into each door hinge.
WHAT TO USE
Paper towel and spray
glass cleaner
OR
Warm, soapy water and
a nonabrasive, plastic
scrubbing pad
Self-Cleaning cycle
Insert small end
of pin here
CARI NG F OR YO UR O VEN
HOW TO CLEAN
Make sure oven is cool.
Follow directions provided with the
cleaner.
Wash, wipe with clean water, and dry
thoroughly.
See "Using the Self-Cleaning Cycle" on
pages 36-41.
CARIN G FO R YO UR O VEN
3.
Grasp under handle and gently close
door as far as it will shut. Pull door out
at bottom to remove.
4.
Set door aside on protected surface.
43

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rbd277pdRbd307pdRbs307pd

Table of Contents