Miele CVA 6431 Operating And Installation Instructions page 67

Built-in coffee machine
Hide thumbs Also See for CVA 6431:
Table of Contents

Advertisement

Problem
The steam valve
has been pushed
downwards and
has engaged with
the
cappuccinatore,
but no steam is
coming out. Milk is
not being heated or
frothed.
No milk froth is
coming out of the
cappuccinatore.
Possible cause and remedy
The steam valve is blocked.
^ Open the front of the coffee machine.
^ Push the steam valve back down again, and pull the
rubber sleeve off.
^ Using the small end of the tool for removing the capsule
hopper, turn the tip of the steam valve to the left to
remove it.
^ Clean the tip thoroughly and then screw it back on again.
The spout in the lid is pulled out (|). Milk will be frothed in
the cappuccinatore jug.
^ Push the spout back in (H).
The cappuccinatore lid is incorrectly assembled.
^ See "Cleaning and care - Cappuccinatore" for more
information.
The milk system of the cappuccinatore is blocked.
^ Clean the cappuccinatore thoroughly (see "Cleaning and
care - Cappuccinatore").
Problem solving guide
67

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cva 6431cCva 6431 c

Table of Contents