Loading Discs; Ejecting A Disc; Changing Discs - Kenwood DDX8639 Instruction Manual

Loading Discs

1
Open the panel
Press the [Panel Open/ Close] key.
2
Insert a disc
Press the [LOAD] key, and then insert a disc in the
disc insertion slot after the "Waiting" disappears.
The inserted disc will be loaded as the disc with
the unused number next to the number of the last
played disc.
The [EJECT] key indicator corresponding to the
number of the loaded disc lights.
Playback of the inserted disc starts.
To load discs corresponding to all [EJECT] key
indicators, see <Loading All Discs>.
Loading All Discs
1sec.
Press the [LOAD] key for more than 1 second until
"Waiting" disappears, and then insert discs one by one.
When discs corresponding to all the six [EJECT] key
indicators have been loaded, playback of the last
inserted disc starts.
3
Close the panel
Press the [Panel Open/ Close] key.
• You cannot insert a disc during playback. To stop playback,
press the [LOAD] key.

Ejecting a Disc

1
Open the panel
Press the [Panel Open/ Close] key.
2
Eject the disc
—
1
Press the [EJECT] key of the disc you want to eject.
Ejecting the disc will stop playback.
3
Close the panel
Press the [Panel Open/ Close] key.
• Playback stops even when a disc which is not being played
is ejected. To restart playback, select a disc on the DVD/
VCD control screen (page 18) or CD/MP3 control screen
(pages 22 and 23). In this case, playback will start from the
beginning of the disc.

Changing Discs

1
Eject a disc
See <Ejecting a Disc>.
2
Insert another disc
The inserted disc will be loaded in place of the
ejected disc.
3
Close the panel
Press the [Panel Open/ Close] key.
• You cannot insert a disc when the disc number is displayed
with " ". Press the [LOAD] key, and then insert a disc
in the disc insertion slot after the "Waiting" disappears.
6
11
|
English