Set Station Name; Frequency Step Setting; Direct Search - Kenwood DDX8639 Instruction Manual

Set Station Name

Names a station.
1
Tune in a station you wish to name
FM
2
Call the Tuner Menu
Me n u
3
Select the Set Name mode
Name Set
4
Enter a name
For character entry details, see <Character Entry>
(page 34).
5
Exit the Set Name mode
• You can store up to 30 stations in memory.
• You can set a station name only after you have applied
the parking brake.

Frequency Step Setting

Changes the tuning frequency step.
The original setting is 50 kHz for FM band and 9 kHz
for AM band.
1
Switch the frequency step
While pressing the
Reset button.
Release the Reset button first, after the display
appears. And then release your fingers from the
and
SRC
The frequency setp changes to 200 kHz for FM
band and 10 kHz for AM band.
AM
SRC Reset button
and , press the
SRC
.
• When the same operation is repeated, the frequency
step returns to the original setting.
• When the frequency step is changed, the unit returns to
the factory setting.

Direct Search

Tunes in a station when its frequency is entered.
1
Select a band
2
Select the Direct Search mode
3
Enter frequency
—
When you enter frequency, signal reception starts.
Example: When you receive FM 92.1 MHz
Example: When you receive AM 810 kHz
• The operation ends automatically if you do not operate
within 10 seconds.
Tuner Control
29
|
English