Precautions - Icom IC-F5122D Instruction Manual

PRECAUTIONS

R WARNING! NEVER
AC outlet. This may pose a fire hazard or result in an electric
shock.
R WARNING! NEVER
power source of more than 16 V DC or use reverse polarity.
This could cause a fire or damage the transceiver.
R WARNING! NEVER
tween the DC plug and fuse holder. If an incorrect connection
is made after cutting, the transceiver might be damaged.
R WARNING! NEVER
normal operation of the vehicle may be hindered or where it
could cause bodily injury.
CAUTION: NEVER
allow children to touch the trans-
ceiver.
CAUTION: NEVER
expose the transceiver to rain,
snow or any liquids.
USE
the specified microphone only. Other microphones
have different pin assignments and may damage the trans-
ceiver.
connect the transceiver to an
connect the transceiver to a
cut the DC power cable be-
place the transceiver where
DO NOT
use or place the transceiver in areas with tem-
peratures below –25°C or above +55°C, or in areas subject
to direct sunlight, such as the dashboard.
DO NOT
operate the transceiver without running the ve-
hicle's engine. The vehicle's battery will quickly run out when
the transceiver transmits while the vehicle's engine is OFF.
DO NOT
place the transceiver in excessively dusty envi-
ronments.
DO NOT
place the transceiver against walls. This will ob-
struct heat dissipation.
DO NOT
use harsh solvents such as benzine or alcohol
when cleaning, as they will damage the transceiver sur-
faces.
BE CAREFUL!
The transceiver will become hot when
operating continuously for long periods of time.
ii