Icom IC-F5122D Instruction Manual page 26

We Icom Inc. Japan
1-1-32, Kamiminami, Hirano-ku
Osaka 547-0003, Japan
Declare on our sole responsibility that this equipment complies with the
essential requirements of the Radio and Telecommunications Terminal
Equipment Directive, 1999/5/EC, and that any applicable Essential Test
Suite measurements have been performed.
Kind of equipment: UHF TRANSCEIVER
iC- f6122d
Type-designation:
Version (where applicable):
This compliance is based on conformity with the following harmonised
standards, specifications or documents:
i) EN 300 086-2 V1.3.1 (2010-06)
ii) EN 300 113-2 V1.4.2 (2009-11)
iii) EN 300 219-2 V1.1.1 (2001-03)
iv) EN 301 166-2 V1.2.3 (2009-11)
v) EN 301 489-1 V1.8.1 (2008-04)
vi) EN 301 489-5 V1.3.1 (2002-08)
vii) EN 60950-1:2006/A1:2010
Versions of
symbol on the serial number
essential requirements of the European Radio and
Telecommunication Terminal Directive 1999/5/EC.
This warning symbol indicates that this equipment
operates in non-harmonised frequency bands and/
or may be subject to licensing conditions in the
country of use. Be sure to check that you have the
correct version of this radio or the correct program-
ming of this radio, to comply with national licensing
requirement.
ABOUT CE
400–470 MHz 6.25 kHz/12.5 kHz/25 kHz
400–470 MHz 6.25 kHz/12.5 kHz/20 kHz
the IC-F6122D which display the "CE"
DECLARATION
OF CONFORMITY
Bad Soden 11th Jul. 2011
Place and date of issue
Icom (Europe) GmbH
Communication Equipment
Auf der Krautweide 24,
65812 Bad Soden am Taunus,
Germany
Authorized representative name
Y. Furukawa
General Manager
Signature
label, comply with the
A-6906H-3EU
JUN.2011