Roland JUNO-G Product Manual page 22

Make your song into a CD
Part 1: Create a WAV fi le on the JUNO-G
1
Mix down your completed song
into a single WAV file
In order to create a CD, the song you created on the JUNO-G has to
be rendered into a WAV fi le. Since WAV fi les can be played back on
your computer, you can use them to make a CD.
Rendering all tracks into a single WAV fi le
With the AUDIO TRACK screen displayed, hold down the [SHIFT]
button and press the [MIXDOWN] button; the mixdown standby
screen will appear. Follow the steps shown below, and the region
of measures you specify will be rendered into a WAV fi le.
22
Piano
Bass
Drums
Guitar
Vocal
Hold down the [SHIFT] button
and press the [MIXDOWN]
button.
Use the [Down cursor]
button to move the cursor.
Turn the dial to specify the
last measure.
In this example, press [CANCEL]
so that the mixdown fi le won't
be assigned to a track.
Save the song data on a card
2
When you've fi nished the mixdown, save your completed song on
a card. If you don't do this, all your hard work up to this point will
be lost forever when you turn off the power.
What you're saving here is the data for "the entire song. " This single
Save operation will save the "MIDI tracks, " "AUDIO tracks, " and the
"mixed-down WAV fi le" to the card all at once.
With the AUDIO TRACK or MIDI TRACK screen displayed, press the
[WRITE] button.