Assembly Instructions; Operating Instructions - Kärcher K 2.26 M Plus Operator's Manual

ASSEMBLY INSTRUCTIONS

Required tools
Screwdriver, small size (not supplied)
for connecting high pressure hose and
trigger gun.
Assembly
STEP 1:

Insert wheels into the body of the unit.
STEP 2:

Install the supplied connector to the
unit's water inlet.
Note: Never attach the garden hose
connector to the unit's water inlet!
STEP 3:

Push the high pressure hose into the
trigger gun until it locks audibly.
Note: Make sure the connection nip-
ple is aligned correctly.
Check the secure connection by pull-
ing on the high pressure hose.
6 English
Disconnect:
Press the disconnect key on the trig-

ger gun and remove the high pres-
sure hose from the trigger gun.
OPERATING
INSTRUCTIONS
STEP 1:

Connect the high pressure hose to
the unit's high pressure outlet.
STEP 2:

Insert the spray wand of your choice
into the trigger gun. Press in against
the spring tension and twist into
locked position.
STEP 3:

1 Screw the supplied garden hose con-
nector on to the end of your garden
hose.
2 Push the garden hose connector on
to the water inlet connector and
make sure you hear it click into place
before proceeding.