Samsung Vacuum Cleaner User Manual page 16

troubleshooting
pROblem
Motor does not start
Suction force is gradually
decreasing
cord does not rewind fully
Vacuum cleaner does
not pick up dirt
low or decreasing suction
body overheating
Static electicity discharge
sOlUTION
• Check cable, pulg and socket.
• Leave to cool.
• Check for blockage and remove.
• Pull the cord out 2-3m and push down the cord rewind button.
• Check hose and replace if required.
• Please check filter and, if required, clean as illustrated in the
instructions. if filters are out of condition change them to new ones.
• Please check filters, If required clean as illustrated in the instruction.
• Please decrease power suction.
Design & specification are subject to change without notice.