Table of Contents
Advertisement
AXIS Q6032-C PTZ Dome Network Camera
Technical Specifications
Function
DC input and DC
12 V DC
output
GND
N/a
Network connector
Two 2-pin Ethernet terminal blocks.
I/O terminal connector
6-pin terminal blocks for:
• Digital Input/Output
• Power (DC output)
• Ground (GND)
Function
Pin
1, 4, 6
GND
2
DC output
Configurable
3, 5
(Input or Output)
I/O terminal connector
2-pin terminal block.
Multi-Connector Cable
The supplied multi-connector cable is required in order to maintain the camera's IP rating.
Connect the multi-connector cable to the camera's multi-connector and to the connectors in the supplied media converter switch,
see page 5 .
Note
See page 55 for technical specifications.
The cable provides the following signals:
• DC power
• Network (Ethernet 10/100Base-T)
• I/O
Pin
Notes
1, 2
Power out to camera
3
Ground
4
N/a
Notes
Ground
Power out
Digital input
Digital output (transistor — open collector)
Specifications
12 V DC, 50 mA
0 to +30 V DC
Max load =100 mA
Max voltage = +30 V DC
58
Specifications
Max load = 6.5 A
12.0 – 13.2 V DC, min 70 W
Advertisement
Table of Contents
