Sony Handycam DCR-HC62 Operating Manual page 52

52
IIISTANDARD SET menu (Continued)
CAMERA DATA (below)
Displays camera setting data.
_,,~
• _ j
"O;::I~
&1~.b
c.:J"""''1t1J~
[I]
SteadyShot off
[g]
Exposure
~ White balance
@]Gain
[ID
Shutter speed
[§]
Aperture value
" Notes
• The exposure adjustment value (OEV), a shutter
speed, and the aperture value appear when still
images on a "Memory Stick Duo" are played
back.
• In the [DATFJTIME] data display, the date and
time are displayed in the same area. If you
record a picture without setting the clock, [--- --
----] and [--:--:--] will appear.
• During Easy Handycam operation, you can set
[DATEITIME] only.
w
REMAINING
~AUTO
Displays the remaining tape indicator for
about 8 seconds in situations such as those
described below.
• When you set the POWER switch to PLAY/
EDIT or CAMERA-TAPE with a cassette
inserted.
• When you touch
I~
III
(PlaylPause).
ON
Always displays the remaining tape
indicator.
REMOTE CTRL (Remote control)
The default setting is
[ON],
allowing you to
use the supplied Remote Commander
(p.93).
.~.
Tips
• Set to [OFF] to prevent your camcorder from
responding to a command sent by another VCR
remote control unit.
BEEP
~ON
A beeping sound starts when you start/stop
recording, or operate the touch panel.
OFF
Cancels the beeping sound and shutter
sound.
DISP OUTPUT
~LCD PANEL
Shows displays such as the time code on
the LCD screen and in the viewfinder.
V-OUT/PANEL
Shows displays such as the time code on
the TV screen, LCD screen, and in the
viewfinder.
MENU ROTATE
~NORMAL
Scrolls the menu items downwards by
touching
0.
OPPOSITE
Scrolls the menu items upwards by
touching
0.
A.SHUT OFF (Auto shut off)
~5min
The camcorder is automatically turned off
when you do not operate your camcorder
for more than approximately 5 minutes.
NEVER
The camcorder is not automatically turned
off.