Sony Handycam DCR-HC62 Operating Manual page 31

3
Press
~REW.
The tape stops automatically when the
tape counter reaches "0:00:00."
The tape counter returns to the time
code display, and the zero set memory
display disappears.
4
Press PLAY.
Playback starts from the point
designated "0:00:00" on the tape
counter.
To cancel the operation
Press ZERO SET MEMORY again before
rewinding.
U Notes
• There may be a discrepancy of several seconds
between the time code and the tape counter.
• Zero set memory will not function correctly if
there is a blank section between recorded
sections on the tape.
You can locate the point where the
recording date changes.
Make sure that the PLAY/EDIT lamp
lights up (p. 26).
SEARCHM.
STOP
1
Press SEARCH M. on the Remote
Commander.
2
Press ....
(previous)/~(next)
to
select a recording date.
~
GOmin
Sf -
0:00:00:00
30min~
DATE -01
SEACH
To cancel the operation
Press STOP.
U
Notes
• The Date search will not function correctly
when there is a blank section between recorded
sections on the tape.
•
31