Sony Handycam DCR-HC62 Operating Manual page 33

To set the aspect ratio according to
the connected TV (16:9/4:3)
Change the aspect ratio of the image
according to the screen size of your TV.
CD
Slide the POWER switch repeatedly to tum
on the PLAYIEDIT lamp.
®
Touch Ip-MENUI -+ [MENU] -+
III
(STANDARD SET) -+ [TV TYPE]-+
[16:9] or [4:3] -+ lOKI.
U
Notes
• When you set [TV TYPE] to [4:3], or when the
picture's aspect ratio switches between 16:9 and
4:3, the image may jitter.
• On some 4:3 TVs, the still image recorded in 4:3
aspect ratio may not appear in full screen. This
is not a malfunction.
• When you play back a picture recorded in 16:9
aspect ratio on a 4:3 TV not compatible with the
16:9 signal, set [TV TYPE] to [4:3].
• When you connect your camcorder to a TV
compatible with the ID-1I1O-2 system, and play
back the tape, set [TV TYPE] to [16:9]. The TV
automatically switches the aspect ratio
according to the playback picture.
When your TV is monaural (Only one
audio input jack)
Connect the yellow plug of the AIV
connecting cable to the video input jack and
connect the white (left channel) or the red
(right channel) plug to the audio input jack
of your TV or VCR.
•
33