Top Panel; Bottom Panel - Comcast Wireless Gateway User Manual

T P
OP ANEL
The top panel of your Wireless Gateway features a WPS
button (Fig. 3). WPS (or WiFi Protection Setup) enables you
to securely set up a WiFi network without entering the
Network Key.
B P
OTTOM ANEL
The bottom panel of your Wireless Gateway has a panel for
the battery (for XFINITY Voice Service only). View battery status
by accessing the Battery menu from the Web Management
Interface at http://10.0.0.1. The battery will provide backup for
voice service in case of a power outage, but is not intended to
replace the AC power for an extended period.
To install a battery, follow these steps:
1.Place the Wireless Gateway sideways on a table.
2.Remove the battery cover on the bottom panel and set it aside.
3.Insert the battery in the battery compartment with the corresponding polarity correctly in place.
4.Replace the battery cover.
A battery is needed to enable voice service availability in the event of a power outage. A battery is available
for your Wireless Gateway only if you subscribe to XFINITY Voice. If you are an XFINITY Voice subscriber and
you did not receive a battery, please call
Note: Do not unplug the power cord of your Wireless Gateway for an extended period. If left
unplugged and the battery power is drained, you will not be able to make any phone calls,
including 911 emergency calls.
Wireless Gateway User Guide
.
1.800.XFINITY
Fig. 3
4