Bottom Label - Comcast Wireless Gateway User Manual

B L
OTTOM ABEL
The label on the underside of the Wireless Gateway provides important information you may need to
manually connect wireless products to your home network.
Network Name
(SSID)
Encryption
Network Key
WPS PIN
D C
EFAULT ONFIGURATIONS
Following are the factory default configurations for the Wireless Gateway. You may want to change some
settings (for advanced users).
WPS
Gateway IP
User Name
Password
Firewall Configuration Low (allows most traffic)
UPnP
All other features are disabled by default. In order to enable and modify other features, use the All other features are disabled by default. In order to enable and modify other features, use the
Administration site at Administration site at http://10.0.0.1. http://10.0.0.1.
Wireless Gateway User Guide
Table 3
HOME - XXXX (where XXXX is the last 4 digits of the Cable Modem MAC)
WPAWPA2-PSK (TKIP/AES)
[Printed on the label]
[Printed on the label]
Table 4
Enabled
http://10.0.0.1
admin (not case-sensitive)
password (case-sensitive)
Enabled
5