Top Panel; Bottom Panel - Comcast Wireless Gateway User Manual

T P
OP ANEL
The top panel of your Wireless Gateway features a WPS button (Fig. 1). WPS (or WiFi Protection
Setup) lets you securely set up a WiFi network without having to enter the Network Key.
See page 11.
B P
OTTOM ANEL
The bottom panel of your Wireless Gateway contains a panel for installing the backup battery. The
battery will provide backup for voice service in case of a local power loss. The battery backup is not
intended to take the place of AC power.
To install a battery into your Gateway, use the following procedure.
1.Place the Wireless Gateway on its side on a table.
2.Remove the battery compartment door on the bottom panel and set it aside.
3.Insert the battery into the battery compartment with the polarity in place.
4.Close the battery compartment.
Notes: A battery is needed to enable voice service availability in the event of a power outage. A
battery is included with your Wireless Gateway only if you subscribe to XFINITY Voice. If
you did not receive a battery and you are an XFINITY Voice subscriber, please call
1-800-XFINITY.
By accessing the Battery menu from the Gateway's Web interface, you can view status
information about the battery.
Wireless Gateway User Guide
Fig. 1
4