Rear Panel - Comcast Wireless Gateway User Manual

R P
EAR ANEL
The rear panel of your Wireless Gateway features a Reset button, as well as ports for attaching the supplied
power adapter and connecting additional devices.
Fig. 2
Reset Button (Recessed to protect against accidental reset)
Pressing the Reset button for varying lengths of time performs two types of reset operations.
Normal Reset – reboots the Wireless Gateway but retains current configuration settings.
•
Use a thin object, press the Reset button for 2-5 seconds and release.
Factory Reset – deletes all changes made to the original configuration settings and restores the Wireless
•
Gateway to the factory configuration.
Use a thin object, press and hold the Reset button for at least 15 seconds or more before releasing.
You can also reset your Wireless Gateway using the Web Management Interface at http://10.0.0.1.
Note
: I f you select Restore Factory Settings, be certain you want to reset ALL settings (such as passwords, parental
controls and firewall settings) before proceeding! All customized settings made to your Wireless Gateway will be
lost. Also, a Factory Restore will take your Wireless Gateway out of Bridge Mode if it had been previously
enabled. Call 1.800.XFINITY to re-enable Bridge Mode.
Wireless Gateway User Guide
The back of your Wireless Gateway has the following connectors and
controls:
A Reset button: resets the Wireless Gateway
B USB host connector [Currently Not Available]
C Tel 1 connector for analog phone line
D Tel 2 connector for analog phone line
E Gigabit Ethernet (1 - 4) connectors for use with a computer
LAN port
F Cable connector for the coaxial cable
G Power connector for the power cord
LED Gigabit Ethernet Connectors LED Indicators
Green Indicates Gigabit Ethernet (1,000 mbps) in use
Orange Indicates Fast Ethernet (10/100) in use
Table 2
3