Overview; Front Panel - Comcast Wireless Gateway User Manual

Overview

F P
RONT ANEL
The front panel, featuring a set of LED indicators, shows the status of your Wireless Gateway. Being familiar
with these indicators can help with troubleshooting.
Fig. 1
LED Front Panel LED Indicators
Power Blinking=power failure and during battery backup | ON=power being supplied | OFF=power is not being supplied
US/DS Blinking=ranging is in progress | ON=ranging is complete on 1 channel only | OFF=scanning for DS channel
Online Blinking=cable interface is acquiring IP address, Time of Day, Cable Modem configuration | ON=device is online |
OFF=device is offline
WiFi Blinking=transmitting data to the WiFi interface | ON=WiFi is enabled | OFF=WiFi is disabled
Tel1 Blinking=Tel line 1 is in use | ON=Tel 1 port is online | OFF=Tel 1 port is offline
Tel2 Blinking=Tel line 2 is in use | ON=Tel 2 port is online | OFF=Tel 2 port is offline
Battery Solid Glow=battery is charging | Blinking=battery power is low; use AC power as soon as possible | ON=operating
on AC power, battery not charging | OFF=(a) If Battery LED is off and Power LED is blinking, then device is in battery
backup mode. (b) When Battery LED is off and Power LED is solid, no battery is installed or is not functioning
properly.
Wireless Gateway User Guide
The front of your Wireless Gateway has the following
LED indicators:
A WPS button: WPS (WiFi Protected Setup) is active
(Button with light ring is located on top panel)
B Power: AC power status
C US/DS: Upstream and downstream connectivity
D Online: Internet connectivity status
E WiFi: Status of the wireless LAN
F Tel 1
: Status of telephone line 1
G Tel 2
: Status of telephone line 2
H Battery: Battery status
Table 1
2