Overview; Front Panel - Comcast Wireless Gateway User Manual

Overview

F P
RONT ANEL
The front panel of your Wireless Gateway features a set of LED indicators which shows the status
of your Gateway and can simplify troubleshooting.
LED
Power Blinking=power failure and during battery backup. ON=power being supplied. OFF=power is not being supplied.
US/DS Blinking=ranging is in progress. ON=ranging is complete on 1 channel only. OFF=scanning for DS channel.
Online Blinking=cable interface acquiring IP, Time of Day, Cable Modem configuration. ON=Gateway is operational.
OFF=Gateway is offline.
WiFi Blinking=data is transmitting over the Gateway's WiFi interface. ON=WiFi is enabled. OFF=WiFi is disabled.
Tel1 Blinking=Tel line 1 is in use. ON=Gateway's Tel 1 port is online. OFF=Gateway's Tel 1 port is not online.
Tel2 Blinking=Tel line 2 is in use. ON=Gateway's Tel 2 port is online. OFF=Gateway's Tel 2 port is not online.
Battery Blinking=battery power is low. Use AC power as soon as possible. ON=Gateway is operating on AC power,
battery is not charging. OFF=(a) If Battery LED is off and Power LED is blinking, then device is in battery backup
mode. (b) If Battery LED is off and Power LED is solid, this indicates there is no battery or battery is not properly
functioning. Solid Glow=battery is charging.
Wireless Gateway User Guide
The front of your Wireless Gateway (Fig. 1) has the
following indicators:
A WPS button: WiFi Protected Setup is active
(Button with light ring is located on top of unit)
B Power: AC power is available to the unit
C US/DS: Upstream and downstream connectivity
D Online: Internet connectivity status
E WiFi: Status of the wireless LAN
F Tel 1: Status of telephone line 1
G Tel 2: Status of telephone line 2
H Battery: Battery status
Fig. 1
Table 1. Front Panel LED Indicators
2