Table of Contents
Advertisement
MENUS LANGUAGE SELECTION, CHILD LOCK, CLOCK
SETTING, WAKE UP, NOISE REDUCTION
These functions are available in the Features menu (see description page 13).
CHILD LOCK
This function only allows the TV to be turned on using the remote con-
trol. Once the user has set this CHILD LOCK to ON or OFF, it will remain in
this condition until the user changes it again.
WAKE UP
It is necessary to have set the clock (either manually or automatically) in
order to be able to use this function. If the clock is not set (--:-- is shown)
then the WAKE TIME and WAKE PROG. will not be selectable.
The default setting for WAKE TIME is in the „OFF" position. After each use
(the TV turns on according to the previous setting) the WAKE TIME will
be returned to the „OFF" position, conserving always the last time setting
entered ready for re-use.
CLOCK SETTING
The TV will automatically attempt to set the clock when powered on (with
the MAIN POWER button). It takes as reference information embedded in the
teletext signal of the channel defined by CLOCK PROG. Therefore, automatic
clock setting is only possible if teletext is available on this channel.
If no time is captured automatically (the clock will show - - : - -), then the TV
will try again to set the clock whenever turning on from standby mode.
MENUS DESCRIPTION
MAIN MENU
All menus are removed within 60 seconds if you don't press any button.
Press the remote control MENU button (A19) to display the main menu.
Then, you have the choice between several sub-menus:
If you want to Exit the main menu, press the MENU button (A19) a second time.
- To select one of the sub-menus, use the remote control CURSOR UP (A6), DOWN
(A21) buttons.
- To enter the selected sub-menu, press the remote control OK button (A18).
Remark: Also you can access MENU with side panel buttons.
(please notice that side panel TV/AV button (B7) has same functions as OK
button on remote controller(A18))
Remark: In AV mode the INSTALL menu is not available, and will not be selectable.
HOW TO USE THE SUB-MENUS
The sub-menus referred to here are: PICTURE, SOUND, INSTALL, FEATURES.
- Select the desired Position
- The remote control CURSOR
by using the remote control
LEFT (A7) or RIGHT (A20) but-
CURSOR UP (A6) or DOWN
tons if you want to modify
(A21) buttons.
the function value.
9
Alternatively, the user can enter the time manually using the CLOCK func-
tion. However, if this is done the clock will not be periodically updated as
would happen if the time is set automatically. We recommend that the
user choose (if available) a CLOCK PROG which allows the time to be up-
dated automatically.
DEFAULT ZOOM CONTROL
If the ZOOM control is set to AUTO (A15, see page 8, FORMAT SELECTION),
then the picture format presented is controlled by the received picture for-
mat signalling data embedded in the transmission. In the absence of this
signalling data (as can often be the case) a default format must be used.
This default format can be selected by the ZOOM AUTO function.
LANGUAGE
This can be changed at any time by the user in the LANGUAGE menu (ac-
cessed via the FEATURES menu).
- Adjustthe function using :
- The remote control NUMBER
- Store (if needed) by press-
0...9 buttons (A3) to enter
ing the remote control OK
directly new data.
button (A18).
PICTURE
PICTURE
SOUND
SOUND
INSTALL
INSTALL
FEATURES
FEATURES
- Then Exit to main menu by
pressing the MENU button
(A19).
Advertisement
Table of Contents
