Start Up; Connecting External Equipment - Daewoo DTC-29G1 Instruction Manual

START UP

LANGUAGE MENU
The very first time that you turn on the TV, the LANGUAGE menu will appear on the screen. Its purpose is to enable you to select the language that will be
used for all the OSD (On Screen Display) menus. The user must enter a choice of language before proceeding further.
The language entered at this stage can still be modified at any later time, by entering the LANGUAGE menu (accessed from the FEATURES menu: see later
section under MENU DESCRIPTION).
The descriptions used in the menu are those of the country code (e.g. GB = English, NL = Holland etc).
LANGUAGE LANGUAGE
BG
F
I
RO
Selection is made by use of the remote control CURSOR UP (A6) / CURSOR DOWN (A21) keys and CURSOR RIGHT (A20) / LEFT (A7) keys.
Once you are satisfied with your selection, push the OK button (A18) to confirm your choice. The choice will briefly highlight in red, after which the menu
will disappear.
Note : The languages shown are subject to modification without prior notice.
AUTOMATIC TUNING
Automatic Tuning System
If you have a satellite decoder: If your decoder is connected to the TV set by the aerial jack (C1), you must power on the demodulator and tune
Sky News before starting ATSS .
ATSS = Automatic Tuning and Sorting System. To start the ATSS function:
- Select „ATSS „ function.
- Adjust to the required country.
- Press and hold the OK button (A18) to start the automatic tuning.
The ATSS function has started when the phrase „Please Wait !" appears (in red characters ) in the help instructions box, below the Install menu.
When the ATSS function is finished, the stored programs are displayed on screen using Edit menu presentation (to Exit tuning before automatic
tuning is finished, press the remote control MENU button (A19) ).

CONNECTING EXTERNAL EQUIPMENT

The rear Scart1 (C2), Scart2 (C3) sockets, the side AV socket (B9) (B10), and the S-VIDEO socket (B11) are three dedicated sockets to con-
nect audio-video equipment.
Rear
REAR SCART 1 SOCKET (AV1)
This socket (C2) has video / audio inputs and outputs. It is recommended to
connect to this socket automatic AV switching equipment such as pay-TV de-
coders, video games, DVD players and most VCR's.
In most cases, when connecting powered equipment to this socket, the TV set
switches automatically to AV mode. If not, then use the TV/AV buttons (A5) or
(B7) to select AV1.
REAR SCART 2 SOCKET (AV2)
This socket (C3) has video / audio inputs and outputs. Automatic AV switching
equipment(for example most VCR's) can be connected to this socket.
In most cases, when connecting powered equipment to this socket, the TV set
switches automatically to AV mode. If not, then use the TV/AV buttons (A5) or
(B7) to select AV2.
You can also receive an S-VIDEO signal with REAR SCART2 socket, by selecting
S-VIDEO2 with the TV / AV buttons (A5) or (B7).
5
CZ D DK E
FIN GB GR H
N NL P PL
RUS S
VCR / DVD / Video Game / Pay-TV decoder Important:
If your video equipment does not have SCART socket(s), or if you wish
to use only the aerial (RF) connection (not recommended), then you
should make use of PR 00 on the TV set for best performance.