Table of Contents
Advertisement
MENUS LANGUAGE SELECTION, CHILD LOCK, CLOCK SETTING, WAKE UP, NOISE REDUCTION
These functions are available in the Features menu (see description page 11).
CHILD LOCK
This function only allows the TV to be turned on using the re-
mote control. Once the user has set this CHILD LOCK to ON or
OFF, it will remain in this condition until the user changes it
again.
WAKE UP
It is necessary to have set the clock (either manually or auto-
matically) in order to be able to use this function. If the clock
is not set (--:-- is shown) then the WAKE TIME and WAKE PROG.
will not be selectable.
The default setting for WAKE TIME is in the „OFF" position. Af-
ter each use (the TV turns on according to the previous setting)
the WAKE TIME will be returned to the „OFF" position, conserv-
ing always the last time setting entered ready for re-use.
CLOCK SETTING
The TV will automatically attempt to set the clock when pow-
MENUS DESCRIPTION
MAIN MENU
All menus are removed within 60 seconds if you don't press any button.
Press the remote control MENU button (A7) to display the main menu.
Then, you have the choice between several sub-menus:
If you want to Exit the main menu, press the MENU button (A7) a second time.
- To select one of the sub-menus, use the remote control CURSOR UP (A5),
DOWN (A8) buttons.
- To enter the selected sub-menu, press the remote control OK button (A3).
Remark: In AV mode the INSTALL menu is not available, and will not be selectable.
HOW TO USE THE SUB-MENUS
The sub-menus referred to here are: PICTURE, INSTALL, FEATURES.
- Select the desired Po-
- The remote control
sition by using the re-
CURSOR LEFT (A9) or
mote control CURSOR
RIGHT (A6) buttons if
UP (A5) or DOWN (A8)
you want to modify
buttons.
the function value.
ered on (with the MAIN POWER button). It takes as reference
information embedded in the teletext signal of the channel
defined by CLOCK PROG. Therefore, automatic clock setting is
only possible if teletext is available on this channel.
If no time is captured automatically (the clock will show - - : - -),
then the TV will try again to set the clock whenever turning on
from standby mode.
Alternatively, the user can enter the time manually using the
CLOCK function. However, if this is done the clock will not be
periodically updated as would happen if the time is set auto-
matically. We recommend that the user choose (if available) a
CLOCK PROG which allows the time to be updated automati-
cally.
LANGUAGE
This can be changed at any time by the user in the LANGUAGE
menu (accessed via the FEATURES menu).
- Adjust the function using :
- The remote control
- Store (if needed) by
NUMBER 0...9 buttons
(A2) to enter directly
new data.
8
PICTURE
PICTURE
INSTALL
INSTALL
FEATURES
FEATURES
- Then Exit to main
pressing the remote
menu by pressing the
control OK button (A3).
MENU button (A7).
Advertisement
Table of Contents
