Menus Description - Daewoo DTM-2930ME Instruction Manual

MENUS DESCRIPTION

MAIN MENU
All menus are removed within 25 seconds if you don't press any button.
Press the remote control MENU button (A19) to
display the main menu. Then, you have the choice
between several sub-menus:
If you want to Exit the main menu, press the MENU button
(A19) a second time.
- To select one of the sub-menus, use the remote control
CURSOR UP (A6), DOWN (A21) buttons.
- To enter the selected sub-menu, press the remote control
OK button (A18).
HOW TO USE THE SUB-MENUS
The sub-menus referred to here are: PICTURE, SOUND, INSTALL, FEATURES.
- Select the desired
Position by using the
remote control CURSOR
UP (A6) or DOWN (A21)
buttons.
PICTURE MENU
(For operating instructions, see " HOW TO USE THE SUB-MENUS ")
- Select and adjust the level of each function : "brightness", "contrast", "colour", "sharpness".
- The modified values are automatically stored in favourite mode.
If the NTSC standard is detected (eg from VHS player connected to AV1), then "tint " will be
added to this menu.
Important: When viewing an external signal in RGB mode, via SCART 1 socket (C1), only
"brightness" and "contrast" can be controlled.
SOUND MENU
(For operating instructions, see "HOW TO USE THE SUB-MENUS")
- Select "volume" function to adjust the volume level.
- Select "balance" function to adjust sound balance between the left and right speakers. If the
indicator is highlighted in red, then the central balance position has been found.
For DTB-21U7 S
- Select "preset" function to adjust sound properties:
Using the remote control CURSOR LEFT (A7) or RIGHT (A20) buttons, you can choose
between 2 user-definable set-ups: favourite 1, favourite 2 and 3 pre-defined equalizer set-ups:
music, speech, normal.
Selecting "favourite 1" allows you to adjust the five equalizer bars: 120Hz, 500Hz, 1500Hz,
5000Hz, 10KHz.
The levels you select are automatically stored in "favourite 1".
VOLUME
BALANCE
PRESET
120HZ
500HZ
1500HZ
5000HZ
10KHZ
Selecting "favourite 2" allows you to adjust bass and treble levels.
The levels you select for bass and treble are automatically stored in "favourite2".
VOLUME
BALANCE
PRESET
BASS
TREBLE
- Adjust the function using :
- The remote control - The remote control
CURSOR LEFT (A7) or NUMBER 0...9 buttons
RIGHT (A20) buttons if (A3) to enter directly new
you want to modify the data.
function value
SOUND
FAVOURITE 1
SOUND
FAVOURITE 2
PICTURE
SOUND
INSTALL
FEATURES
- Store (if needed) by
pressing the remote
control OK button (A18).
BRIGHTNESS
CONTRAST
COLOUR
SHARPNESS
For DTB-21U7 NS
BASS and TREBLE controls are available.
The levels that you select are automatically stored.
VOLUME
BASS
TREBLE
BALANCE
- Then Exit to main menu
by pressing the MENU
button (A19).
PICTURE
SOUND
8