Table of Contents
Advertisement
PROGRAM SELECTION (FROM 0 TO 99)
Direct selection
Use the remote control NUMBER 0....9 buttons (A3).
For two digits program numbers, enter the second digit within 2 seconds.
SOUND CONTROL
Volume adjustment
Use the remote control VOLUME UP (A20) / DOWN (A7) buttons or the
TV set side panel VOLUME UP / DOWN buttons (B8).
Mute
Mute the sound by pressing the remote control SOUND MUTE button (A2).
Then,
logo is displayed. The previous sound setting is returned after
pressing the same button a second time.
If a sound related function is used (e.g. VOLUME, 3D) then the MUTE will
also be cancelled.
7
Up / Down selection
Use the remote control PROGRAM UP (A6) / DOWN (A21) buttons or the
TV set side panel PROGRAM UP / DOWN buttons (B5).
Mono forcing, dual language
- If you are unable to get good sound
quality for a program due to poor
reception, you can force a change
from stereo to mono transmission by
pressing the remote control MODE
button (A14). Then the program sta-
tus display will indicate „MONO" with
a
icon.
- On the other hand, during a pro-
gram with dual language transmis-
sion, the MODE button (A14) allows
you to toggle between the first and
second language. The program sta-
tus display will indicate „DUAL 1" or
„DUAL 2" (plus NICAM according to
the received signal).
- To return to initial state, press again
the MODE button (A14).
Sound effects
A SPATIAL sound effect is available, using the remote control 3D (A13)
button.
The following display appears:
SPATIAL
STEREO
18:30
To return to initial sound effect, press again the 3D (A13) button.
The following display appears:
OFF
STEREO
18:30
For other adjustments such as BALANCE, EQUALIZER or AVL(option),
use the SOUND menu (page10).
Spatial sound effect
Sound transmission mode
Clock
No sound effect
Sound transmission mode
Clock
Advertisement
Table of Contents
