Table of Contents
Advertisement
Before you start
1 Make sure you have followed steps 1 to 5 under 'Setting up your television' and read 'Stand-by mode'.
2 If you have a video recorder connected with the aerial lead, switch it on to produce a test picture, or play a
video tape.
3 If you have a satellite receiver (or any other piece of equipment as well as the video recorder) connected
with the aerial lead, make sure that mains power is supplied to it and that it is on stand-by.
4 Switch on. (If the screen does not light up, please check previous sections '3 Supply power', '4 - Switch on'
and 'Stand-by mode'.)
1
menu
Press the MENU button to make the picture, sound,
features and install boxes appear on the screen.
• Whenever a menu is displayed, if you do not press a
PR
button within 30 seconds the menu will go off.
• You might already find a menu prompting you to set
the on-screen menu language. In this case, press the
volume increase button to change the setting (GB
stands for Great Britain). Press the MENU button to
PR
finish.
2
volume increase, PR down
PR
PR
3
OK
Press the OK button to display the INSTALL menu.
NORMAL/OK
• Make sure the country listed against 'ATSS' is the
PR
country in which you live (GB stands for Great Britain).
If you need to change the country, press either
volume (
shows.
PR
Tuning in the programmes
PR
Press the volume increase button and
then the PR down button to move the
green highlight to 'INSTALL'.
PR
)button until the correct abbreviation
PR
PR
INSTALL
ATSS
EDIT
SYSTEM
CHANNEL
FREQ
NAME
PROGRAM
STORE TO
7
SOUND
PICTURE
INSTALL
FEATURES
SOUND
PICTURE
INSTALL
FEATURES
VPosition
CBAdjust
W
OK Access
MENU Exit
GB
GB
C55
743.25
BBC1
01
01
Advertisement
Table of Contents
