Start Up; Connecting External Equipment - Daewoo 15U7LT Instruction Manual

START UP

LANGUAGE MENU
The very first time that you turn on the TV, the LANGUAGE menu will appear on the screen. Its purpose is to enable you to select
the language that will be used for all the OSD (On Screen Display) menus. The user must enter a choice of language before pro-
ceeding further.
The language entered at this stage can still be modified at any later time, by entering the LANGUAGE menu (accessed from the
FEATURES menu: see later section under MENU DESCRIPTION).
The descriptions used in the menu are those of the country code (e.g. GB = English, NL = Holland etc).
Selection is made by use of the remote control CURSOR UP (A5) / CURSOR DOWN (A8) keys and CURSOR RIGHT (A6) / LEFT (A9) keys.
Once you are satisfied with your selection, push the OK button (A3) to confirm your choice. The choice will briefly highlight in red,
after which the menu will disappear.
Note : The languages shown are subject to modification without prior notice.
AUTOMATIC TUNING
Automatic Tuning System
If you have a satellite decoder: If your decoder is connected to the TV set by the aerial jack (C2), you must power on the demodu-
lator and tune Sky News before starting ATSS .
ATSS = Automatic Tuning and Sorting System. To start the ATSS function:
- Select „ATSS" function.
- Adjust to the required country.
- Press and hold the OK button (A3) to start the automatic tuning.
The ATSS function has started when the phrase „Please Wait !" appears (in red characters ) in the help instructions box, below the
Install menu.
When the ATSS function is finished, the stored programs are displayed on screen using Edit menu presentation (to Exit tuning be-
fore automatic tuning is finished, press the remote control MENU button (A7) ).

CONNECTING EXTERNAL EQUIPMENT

The rear Scart1 (C1) socket, the front AV socket (B7) (B8), are dedicated
sockets to connect audio-video equipment.
REAR
REAR SCART 1 SOCKET (AV1)
This socket (C1) has video / audio inputs and outputs. You can con-
nect automatic AV switching equipment such as pay-TV decoders, vid-
eo games, DVD players and most VCR's. In most cases, when connecting
powered equipment to this socket, the TV set switches automatically to
AV mode. If not, then use the TV/AV buttons (A4) or (B4) to select AV1.
LANGUAGE LANGUAGE
VCR / DVD / Video Game / Pay-TV decoder Important:
If your video equipment does not have SCART socket(s),
or if you wish to use only the aerial (RF) connection (not
recommended), then you should make use of PR 00 on
the TV set for best performance.
5
BG CZ D DK E
F FIN GB GR H
I N NL P PL
RO RUS S