Table of Contents
Advertisement
DRYNESS
CONTROLS
AUTO DRY
AUTO DRY saves you time by
providing
the best drying results
in the shortest
time. This can help
you save money on utility bills and
reduce the risk of fabric damage,
Use this cycle for most loads. Drying time
varies according
to type of fabric, size of
load and dryness
setting.
• Set the Dryness Control to
NORMAL
DRY(*) which is good
for most fabrics.
• Display will show "AU" until the last
few minutes of the cycle when it will
change to show the number of minutes
remaining.
• At the end of the cycle, feel the dried
clothes. If they are damp, select MORE
DRY the next time you do a similar load.
If they are overdried,
select LESS DRY
the next time you do a similar load.
• Dryness is determined
by an electronic
sensor that "feels" the amount of mois-
ture in clothes as they pass over it. When
the dryness selected is reached, the dryer
goes into a COOL DOWN period. The
amount of COOL DOWN time depends
on load size and dryness setting.
• The CYCLE SIGNAL sounds once the
cycle is completed.
• If you do not unload the dryer, it goes
into WRINKLE
GUARD, if selected.
For
an explanation
of WRINKLE
GUARD,
see page 24.
22
LEVEL 5 -__
_
AUTO DRY
LEVEL 4 _
MOREDRY
LEVEL 3 -_
NORMALDRY
LEVEL 2 -
LESSDRY
LEVEL 1
_RREAUTO
DRY
T
TIMED DRY CYCLE
Use th s control to get up to 99 minute,'
of healed drying time.
• By pressing the MORE or LESS pads
under TIMED DRY the drying method
is chenged
from AUTO DRY to TIMI--E
DR"(. You can now' adjust drying time
from 1 to 99 minutes.
• The, heating cycle is followed by a 10-
minut,_ (approx.) COOL DOWN perioc
• The CYCLE SIGNAL sounds once the
cycle is completed.
NOTE: Dryer will go into WRINKLE
GUARD immediately
following
this cycl_
if it is selected.
CYCLE SIGNAL CONTROL
Your dryer sounds a signal when a
drying cycle is finished.The
signal is
helpful when you are drying perma-
nent press, synthetics,
and other
items tl_at should be removed from
the dryer as soon as it stops to pre-
vent wrinkles.
• The volume of the signal can be
adjusted by pressing the MORE or LESS
pads u_der CYCLE :SIGNAL. The tone
you wil! hear at the end of the cycle will
sound as the pads are pushed.
TIMED
DRY
"URE
TIMED
DRY
CYCLE
SIGNAL
_=
--
/
ORE
Advertisement
Table of Contents
