Onboard Devices Configuration - Asus P7H57D-V EVO User Manual

3.6.3

Onboard Devices Configuration

Onboard Devices Configuration
HDA Controller
Front Panel Type
SPDIF OUT Mode Setting
Realtek LAN
LAN Boot ROM
Onboard 1394 Controller
Marvell(R) 88SE6111 Controller [Enabled]
Serial Port1 Address
Marvell(R) SATA6G Controller
HDA Controller [Enabled]
[Enabled]
[Disabled]
The following three items appear only when you set the HDA Controller item to [Enabled].
Front Panel Type [HD Audio]
Allows you to set the front panel audio connector (AAFP) mode to legacy AC'97 or
high-definition audio depending on the audio standard that the front panel audio
module supports.
[AC97]
[HD Audio] Sets the front panel audio connector (AAFP) mode to high definition audio.
SPDIF OUT Mode Setting [SPDIF]
If your graphics card has HDMI output and needs to use SPDIF signal from the
SPDIF_Out header, you need to set to HDMI for HDMI audio output.
[SPDIF]
[HDMI]
Realtek LAN [Enabled]
[Enabled]
[Disabled]
LAN Boot ROM [Disabled]
This item appears only when you set the previous item to [Enabled].
[Enabled]
[Disabled] Disables the LAN Boot ROM.
Onboard 1394 Controller [Enabled]
[Enabled]
[Disabled]
Marvell(R) 88SE6111 Controller [Enabled]
[Enabled]
[Disabled]
3-26
BIOS SETUP UTILITY
Advanced
[Enabled]
[HD Audio]
[SPDIF]
[Enabled]
[Disabled]
[Enabled]
[3F8/IRQ4]
[IDE Mode]
Enables the High Definition Audio Controller.
Disables the controller.
Sets the front panel audio connector (AAFP) mode to legacy AC'97
Sets to [SPDIF Output] for SPDIF audio output.
Sets to [HDMI Output] for HDMI audio output.
Enables the Realtek LAN controller.
Disables the controller.
Enables the Realtek Gigabit LAN Boot ROM.
Enables the onboard IEEE 1394a controller.
Disables the controller.
Enables the Marvell 88SE6111 controller.
Disables the controller.
Options
Enabled
Disabled
Chapter 3: BIOS setup