Uncore Configuration - Asus P7H57D-V EVO User Manual

Active Processor Cores [All]
Allows you to choose the number of CPU cores to activate in each processor package.
Configuration options: [All] [1] [2]
A20M [Disabled]
[Enabled]
[Disabled]
Intel(R) SpeedStep(TM) Tech [Enabled]
[Enabled]
[Disabled]
Intel(R) TurboMode Tech [Enabled]
[Enabled]
[Disabled]
Intel(R) C-STATE Tech [Enabled]
The Intel C-State Technology allows the CPU to save more power under idle mode.
®
[Enabled]
[Disabled]
C State package limit setting [Auto]
This item appears only when you set the Intel(R) C-STATE Tech item to [Enabled]. We
recommend that you set this item to [Auto] for BIOS to automatically detect the C-State mode
supported by your CPU. Configuration options: [Auto] [C1] [C3] [C6]
3.6.2

Uncore Configuration

The Uncore Configuration menu allows you to change the advanced chipset settings.
Uncore Configuration
IMC Type : Clarkdale
Memory Remap Feature
PCI MMIO Allocation: 4GB To 3072MB
CPU Enhanced Debug Function
Initate Graphic Adapter
iGPU Graphics Mode Select
iGPU Frequency
Current iGPU Frequency: 933 MHz
DVMT/FIXED Memory
Memory Remap Feature [Enabled]
[Disabled]
[Enabled]
3-24
Allows Legacy OSes to be compatible with APs.
Disables this function.
The CPU speed is controlled by the operating system.
The CPU runs at its default speed.
Allows processor cores to run faster than marked frequency in specific
condition.
Disables this function.
Enable this item only when you install a C-State Technology-supported CPU.
Disables this function.
BIOS SETUP UTILITY
Advanced
[Enabled]
[Auto]
[PEG/PCI]
[Enabled, 32MB]
[Auto]
[256MB]
Do not allow remapping of memory.
Allows for the segment of system memory that was previously overwritten
by PCI devices to be remapped above the total physical memory.
ENABLE: Allow
remapping of
overlapped PCI memory
above the total
physical memory.
DISABLE: Do not allow
remapping of memory.
Chapter 3: BIOS setup